|
Technical Specifications
- 12 to 24V DC Power Supply
- 6 Inputs with LED Indicators (12~24V DC, NPN type)
- 4 Outputs (each output can sink 1A @ 12~24V DC)
- 8 internal relays+2 internal outputs
- 4 timers (0.1s to 999.9s) 4 counters(1 to 9999)
- 1 sequencer with 32 steps (step# 0 - # 31)
- 216 program steps (1 contact = 1 step)
- Programmable in Ladder Logic software With SIMULATOR.
- Creates ladder program using meaningful names:-
- Uses simulator to fully test programs on the PC screen before downloading
- On-line monitoring of all I/O logic states on ladder diagram or on full screen
- Forced-setting/resetting of i/os can be done directly from computer screen.
- EEPROM Program Storage (40 years)
- Screw Terminal Blocks
- Supports HostLink Command Protocol - The E10+ PLC can be used as a low cost I/O board for PC or other host processor board - Download Host Link Command Reference Manual
Hardware Specifications
| |
|
E10-Relay+
|
E10-npn+
|
| 1. |
Power Supply
|
- 24V AC (transformer) or 24VDC
- Current = 0.2A
- Rectified DC24V availale for
sensor. |
- DC 12 to 24V (+ 10% ripple)
- Current 0.5~2A (load dependent) |
| 2. |
CPU
Program Storage Size
Average Execution Speed
|
216 steps stored in EEPROM
20µs per step
|
216 steps stored in EEPROM
20µs per step
|
| 3. |
Serial Interface |
- 1 x TTL signal
- 1 x RS485 port
- Slave only mode.
- Need Opto232 adapter to
connect to PC. |
- 1 x RS232 or RS485 port
- Jumper selectable
- Slave only mode.
- Direct connection to PC |
| 3. |
Input Circuits
Number of inputs
Input Voltage for Logic 0
Input Voltage for Logic 1
|
6 (PNP type)
open circuit or 0 to 3.5V DC
8 to 24V DC
|
6 (NPN type)
open circuit or 8.5V to 24V
0V to +3.5V DC
|
| 4. |
Output Circuits
Number of outputs
Peak output current
Output Voltage for Logic 1
Inductive back EMF protection
|
4
2.0A @250VAC or 24VDC per output Dry contact
---- No----
|
4
Sink 1.0A per output
1.2V @ Iout = 500mA
-----yes----
|
| 5. |
Dimension |
7.8cm (L) x 5.6cm (W) x 2.5cm(H) |
5.4cm (L) x 5.4cm (W) x 2.0cm(H) |
| 6. |
Weight (approximate) |
75g |
35g |
Click here to view the wiring diagramE10-npn+ and E10-Relay+ Installation Guide - "inst-e10.zip" (111K)
|
